Production Process Flows of Butt Weld Fittings
Oct 24, 2017
In recent years, welded pipe, as an important metal product, has been widely used in construction, petrochemical, energy, machinery manufacturing and other industries. So, what is the production process of welded pipe?
① ELBOWS 弯头
② TEES 三通
③ REDUCERS 异径管
④ CAPS 管帽
⑤ ELBOWS,TEES 弯头,三通
Welded pipe production is mainly divided into the following five steps: steel plate uncoiling, welding, deburring, cutting and finished products.
First of all, steel plate uncoiling. The raw material for the production of welded pipe is steel plate, which is unfolded by the winch device of the uncoiler and transferred to the next process through the transmission mechanism. There are various designs of steel sheet unwinders for different sizes and thicknesses of steel sheets.
The next step is welding. The steel plates are cut into rectangles of the required size and thickness and rolled into cylindrical shapes by means of rollers. The steel plates where the edges meet are then high-frequency welded. High-frequency welding is a common welding method in which the surface of the steel plate is heated to the melting point by the heat generated by the high-frequency current, and then the edges of the plates are joined together using pressure.
The third step is deburring. The weld seam after welding will produce some burrs, which will affect the quality and appearance of the welded pipe. Therefore, the welded seam must be deburred. There are many ways to deburr, the commonly used methods are mechanical deburring and pickling deburring. Mechanical deburring is the use of mechanical equipment to remove the weld seam; pickling deburring is to soak the weld seam in an acidic solution to dissolve the burr.
Cut-to-length is an important part of the production of welded pipes. According to the customer's requirements, the welded steel pipe is cut to the required length. There are generally two methods for cut-to-length cutting, namely, cutter cutting and gas cutting. Cutting machine cutting is the use of mechanical cutting equipment to cut welded pipe; gas cutting is the use of oxygen and fuel gas to generate high temperatures in the cutting area for cutting.
Finally, the finished product. The welded pipe that has gone through the above steps is known as a semi-finished welded pipe and still needs to undergo surface treatment. The surface treatment can be galvanized, sprayed, etc. to improve the corrosion resistance and appearance quality of the welded pipe. After surface treatment, the welded pipe becomes the final product.
To summarize, the production process of welded pipe mainly includes steel plate uncoiling, welding, deburring, cut-to-length and finished product. This process is very rigorous and delicate, and each step requires professional technology and advanced equipment to complete. As an important metal product, welded pipe is widely used in many industries and has made great contributions to social and economic development. We hope that through the introduction of this article, more people will understand the production process of welded pipe and increase their knowledge and understanding of welded pipe.






