Structural Characteristics and Classification of stainless steel braided hose

Jul 07, 2023

Structural characteristics:

1. The whole stainless steel braided hose is made of 1Cr18Ni9T stainless steel, which has strong corrosion resistance.
2. The hose body is thin-walled stainless steel tube body hydraulic molding, with strong flexibility, expansion and contraction, bending and vibration resistance, braided mesh sleeve to strengthen the protection, so that it has a higher pressure-bearing capacity.
3. The connection between the two ends of the hose can also be made in addition to threads, flange standards other than the connection, easy to connect and use.
4. The product is not only suitable for matching with rotary joints, but also widely used in a variety of fluid media transportation soft connection. Common stainless steel braided hose with only one layer of net cover, unusual places of application, there are also two layers of braided, three layers.

 

Classification of stainless steel braided hose
According to the production process
1. Low-grade braided hose
Low-grade braided hose in the material used in the lower end of the wire diameter of fine aluminum wire, iron screw cap, zinc alloy core, and rubber inner tube. This configuration of the product has a certain price advantage, but the lowest grade, it is easy to leakage, oxidation and other problems.
2. Mid-range braided pipe
Mid-range braided pipe is mainly 304 steel wire, EPDM material, all copper fittings. The applicable period is generally more than 5 years.
3. High-end braided hose
High-end braided hose has a specific purpose, such as water purifier braided hose. General requirements in the mid-range configuration above all, the configuration of common 304 stainless steel wire, food-grade silicone inner tube, food-grade PEX-B inner tube, 58-3 all-copper fittings, silicone gaskets and so on.

 

According to the use of purpose points
1. Single head tube
Mainly used for faucets, wash basins and other kitchen and bathroom hardware, her name stems from one end of the outer teeth, also known as the rod, single-ended tube in the braided requirements of 304 not braided tube is stainless steel and alloy wire (aluminum wire) points, also divided into up and down and so on. Rusty steel wire, EPDM inner pipe, fittings for all copper, etc.,
2. Shower pipe
Shower pipe is generally 201 and 304 stainless steel braided, EPDM inner pipe, full copper fittings. "Shower pipe is generally made of 58-3 copper fittings, EPDM inner tube, there are 201 and 304 stainless steel braided, of course, also includes high-end all-copper braided, and stainless steel gold-plated products, these are braided hose in the more high-end products.

3.Braided pipe
Braided pipe is usually used in the implementation of the standard GB/T23448-2009 or JC886-2001, because the braided pipe is mainly used in the sanitary equipment or drinking water equipment on the water supply connection, the water through the pipeline directly after contact with human skin or be directly drinking. So the inner pipe material in contact with the water source is very critical. Existing national standards or standards of the Ministry of Construction require that the inner pipe material must comply with the GBT17219-1998 Safety Evaluation Standards for Drinking Water Transmission and Distribution Equipment and Protective Materials to ensure that the water source is not contaminated.


In Europe, Germany for braided pipes put forward higher requirements, especially with drinking water connected to the braided pipe, the requirement of microbial toxicity of the inner pipe W270 test, in this requirement of the original PVC, EPDM and other raw materials have been unable to meet the requirements. The European market is now commonly used in the latest inner tube material is mainly silicone tube or PEX-B tube, due to the cost of silicone tube is too high, so now the European market PEX-B tube will be the future trend. Of course, including Europe and the United States and other developed countries.

 

Through the above, we have learned that according to different divisions, stainless steel braided hose has different classifications. So we see in our daily lives in the hose, looks similar in appearance, but in fact their characteristics and functions are not the same. So when you are shopping, you can buy according to their own needs, not blindly. I hope that the above content will help you to a certain extent.