Can globe valves and gate valves be mixed?

May 23, 2024

To introduce what is the difference between globe valve and gate valve.
Structure
Installation space is limited in the case of selection to pay attention to.
Gate valve can rely on the media pressure tightly with the sealing surface tightly closed, so as to achieve the effect of non-leakage. When opening and closing the valve spool and seat sealing surface is always in contact and mutual friction, so the sealing surface is easy to wear, the gate valve is close to closing, the pipeline before and after the pressure difference is very large, so that the sealing surface wear is more serious.
The structure of the gate valve will be more complex than the globe valve, from the appearance, the same caliber, the gate valve is higher than the globe valve, the globe valve is longer than the gate valve. In addition, the gate valve also has a distinction between open stem and concealed stem. Globe valves do not.

 

Working Principle
Globe valves in the opening and closing, is the rising stem type, that is to say, turn the handwheel, the handwheel will follow the valve stem to do the rotation and lifting movement. Gate valve is to rotate the handwheel, so that the valve stem to do lifting movement, the position of the handwheel itself remains unchanged.
The flow rate is different. Gate valves require full opening or closing, while globe valves do not. Globe valves have a specified inlet and outlet direction, gate valves do not have import and export direction requirements.
In addition, the gate valve only fully open or fully closed two states, the gate opening and closing stroke is very large, opening and closing time is long. Globe valve valve plate movement stroke is much smaller, and the valve plate of the globe valve can stop at a certain place in the movement, do flow regulation. The gate valve can only be used to do cut off, no other function.

 

Installation and flow direction
Gate valve flow in both directions have the same effect, the installation of no import and export direction requirements, the media can be bidirectional circulation. Globe valve needs to be installed in strict accordance with the direction of the valve body arrow marking, about the globe broad import and export direction there is an express provision, China's valve "three to" the provisions of the flow of the globe broad broad always use the top to bottom.
Cut-off valve is low into the high out, from the outside there is a clear pipeline is not in a phase on the level. Gate valve flow path in a horizontal line. The stroke of the gate valve is larger than that of the globe valve.
From the point of view of the flow sun in the full open gate valve flow resistance is small, load stop valve flow resistance is large. Ordinary gate valve flow resistance coefficient of about 0.08 ~ 0.12, opening and closing force is small, the medium can flow in both directions. Ordinary stop valve flow resistance is 3-5 times the gate valve. Opening and closing need to be forced to close in order to achieve sealing, globe valve spool is completely closed before contacting the sealing surface, so the sealing surface of the wear and tear is very small, due to the flow of the main force need to be added to the actuator of the globe valve should pay attention to the torque control mechanism adjustment.
Globe valve in the installation of two ways, one is the media can enter from the bottom of the spool, the advantage is that when the valve is closed when the packing is not under pressure, you can extend the service life of the packing, and can be in front of the valve pipeline under pressure, the replacement of the packing work; the disadvantage is that the valve's driving torque is larger, is the top of the flow into the 1 time or so, the valve stem by the axial force is large, the valve stem is prone to bending.
So this way is generally only applicable to small diameter globe valve (DN50 or less), DN200 or more globe valves are selected from above the media flow into the way. (Electric globe valve is generally used in the way that the medium enters from above.) Medium from above into the shortcomings of the way just the opposite of the way below.