Sanitary Clamped Butterfly Valve

Size:DN15-DN250 (1/2"- 10")
Material:AISI 316L/304 (1.4306 /1.4404)
Connection:butt welding, clamp, male thread, nut, bushing or flange, etc

Send Inquiry

Description

Sanitary Clamped butterfly valve is a flow control device used to start or stop the flow of fluid in a section of the pipeline. Suitable for food stainless steel piping system, beverage, dairy, brewing, pharmaceutical, biomedical and chemical industries.

Material

Body material: AISI-304 or aisi-316l

Gasket material: silicon, EPDM, Viton, NBR

The valve seat and gasket meet the requirements of FDA 21cfr177.2600

Standard

Standards are available: DIN, SMS, ISO / IDF, BS / RJT and ASME / BPE

Size: DN15-DN250 (1/2"- 10")

End connection: butt welding, clamp, male thread, nut, bushing or flange, etc.

Handle: plastic handle (2-4 positions) or plastic / stainless steel extrusion handle (13 positions)

Actuator: pneumatic stainless steel actuator (vertical), pneumatic aluminum actuator (horizontal), electric actuator.

Control: position sensor, c-top controller, c-top controller (AS-I)

Manual handle, pneumatic actuator and electric actuator are interchangeable.

Technical Specifications

Maximum pressure: 10bar (145psi) DN25 ~ 100; 8bar(120psi)DN125~150

Temperature range: 14 ~ 248 ° f (- 10 ~ 120 ° C), EPDM

Surface treatment: ra16 ~ 32 µ in (0.4 ~ 0.8 µ m)

Supply pressure of air actuator: 70 ~ 115psi

Technical parameter

Products	Product wetted steel parts	AISI 316L / 304 forged (1.4306 / 1.4404)	Provide material inspection report
	Other steel parts	AISI 304
Sealing material	standard	EPDM	All sealing materials comply with FDA 21CFR117.2600
	option	VMQ / FPM
Pressure	working pressure	≤10bar
temperature	Air actuator supply pressure	5~8bar(70~116psi)
	working temperature	EPDM：14~248°F(-10~120)°C VMQ:-58~356°F(-50~+180)°C FPM: -22 ~ 446°F (-30 ~ +230℃) Other materials are available upon request
	Sterilization temperature	302°F (150°C, Max. 20 min)
surface treatment	Internal surface treatment	Ra 16 ~ 32µin (0.4 ~ 0.8µm)
	External surface treatment	Ra32 ~ 64µin (0.8 ~ 1.6µm)
connect	Welding diameter	DIN 11850-2和11850-1/SMS/3A/ISO etc
End connections: butt welding, sanitary clamps, male and female threads, flanges, i-wires or other requirements.